WEN 70711 10-Inch Sliding Compound Miter Saw

August 2, 2013 - Comment

The WEN 10 in. Sliding Compound Miter Saw merges the function of a miter saw with the reach of the radial arm saw. The slider allows for a larger width of board to be cut. Cut molding, fit crown molding crosscut long stock and quickly cut multiple boards to the same length with recurring accuracy.

Buy Now! $159.99Amazon.com Price
(as of April 19, 2020 8:01 pm CDT - Details)

The WEN 10 in. Sliding Compound Miter Saw merges the function of a miter saw with the reach of the radial arm saw. The slider allows for a larger width of board to be cut. Cut molding, fit crown molding crosscut long stock and quickly cut multiple boards to the same length with recurring accuracy. 15 AMP motor 5300 RPM (no load). Cutting capacity; crosscut at 0-Degree miter 0-Degree level 2-3/4 in. x 12 in.; Miter at 45-Degree miter 0-Degree bevel 2-3/4-in. x 8-1/4 in. ; Bevel at 0-degree miter 45-Degree level 1-9/16 in. x 12 in.; Compound at 45-degree miter 45-Degree bevel 1-9/16 in. x 8-1/4 in. 9 positive stops. Features arbor lock for changing blade electric blade brake for safety and precision machined aluminum table top with cast aluminum base. Includes 10 in. carbide tipped blade hold down clamp dust collection bag table extension supports and blade wrench.. D-Handle provides comfort and control. Arbor lock for changing blade securely locks the motor shaft from rotating for quick and safe blade changing.. Electric blade brake quickly stops blade rotation when switch is released for safety.. Table extension supports with adjustable stop added length support to accommodate large workpiece with adjustable stop to make repeated accurate cuts.. Precision machined aluminum table top stable construction for less vibration providing cleaner precision cutting.. Clamping system holds wood securely against fence during cut.. Dimensions ( L x W x H ): 28 x 20.5 x 18.5

Product Features

  • 15 AMP, 5300 RPM motor
  • Positive stops; 0, 15-Degree, 22.5-Degree, 30-Degree and 45-Degree left and right
  • 10-Inch carbide tipped blade
  • Positive Bevel Stops: 0° – 45° Left Only
  • Includes blade, hold down clamp, table extension supports and blade wrench

Comments

donald says:

wen 10” sliding miter saw Remember, only people with problems usually write negative reviews, there will always be someone with a problem. This saw is the first miter saw that i ever used, I am not a professional carpenter. If you want a professional saw used by professionals with profesional results, you need to spend three times this saw. I am using it for a deck and cutting huge peices of wood with very good success, i’m not looking for diamond cut angles under a microscope. This saw is getting a beating with…

Robert Bolin "Draugnar" says:

Typical amateur homeowner needing to do larger pieces of wood… This WEN was a lifesaver that made short work of a minideck. It was built with diagonal planking so lots of 45s. Ran strong, never jammed. The only issues I had while building were a powerstrip died (old powerstrip, not the saw’s fault) and I discovered that mitering doesn’t work if you try to set the miter to the right unless you are also beveling. The guide prevents the blade from sliding all the way back. So you have to set the miter in the other direction and remember to orient your board…

Write a comment

*

--- Terms of Use --- Privacy Policy --- Amazon Affiliate --- Affiliate Disclosure --- FTC Statement --- Contact