Grizzly G0690 Cabinet Table Saw with Riving Knife, 10-Inch

August 3, 2013 - Comment

Arbor speed: 4 300 RPM • Arbor size: 5/8″. Maximum dado width: 13/16″ • Maximum rip capacity: 291/2″. Maximum depth of cut @ 90-Degree: 3-1/8″ • Maximum depth of cut @ 45-Degree: 2-3/16″. Motor: 3 HP 220V single-phase Lesson Table height from floor: 34″ • Table size with extension: 27″ x 40″ • Overall dimensions:

Buy Now! $2,020.00Amazon.com Price
(as of April 20, 2020 12:01 am CDT - Details)

Arbor speed: 4 300 RPM • Arbor size: 5/8″. Maximum dado width: 13/16″ • Maximum rip capacity: 291/2″. Maximum depth of cut @ 90-Degree: 3-1/8″ • Maximum depth of cut @ 45-Degree: 2-3/16″. Motor: 3 HP 220V single-phase Lesson Table height from floor: 34″ • Table size with extension: 27″ x 40″ • Overall dimensions: 62″L x 41″W x 40″H,Maximum dado width: 13/16″ • Maximum rip capacity: 291/2″,Maximum depth of cut @ 90-Degree: 3-1/8″ • Maximum depth of cut @ 45-Degree: 2-3/16″.

Product Features

  • Arbor speed: 4 300 RPM • Arbor size: 5/8-Inch; Maximum dado width: 13/16-Inch • Maximum rip capacity: 291/2-Inch
  • Maximum dado width: 13/16-Inch • Maximum rip capacity: 291/2-Inch
  • Maximum depth of cut @ 90-Degree: 3-1/8-Inch • Maximum depth of cut @ 45-Degree: 2-3/16-Inch
  • Motor: 3 HP 220V single-phase Lesson
  • Table height from floor: 34-Inch • Table size with extension: 27-Inch x 40-Inch • Overall dimensions: 62-InchL x 41-InchW x 40-InchH

Comments

D. Duffey says:

Solid saw with some faults I had little difficulty assembling this saw (I had practice which I will describe later). I removed the table top to lighten the weight as I had to take it down the steps to my basement. I believe removal of the top is a good idea in anyone’s case because it allows for easy access and removal of all the cosmoline, and there’s lots of it. There’s no way to do a good job of this with the top on since it hides the top of the trunnions where the cosmoline is the heaviest, and you’d never see it…

Frank Spillman says:

Early Review This is an early review, as I just received my saw and unpacked it. It is very heavy-duty.The table top is flat and ground to a nice finish. I took my top off as part of the set up, but putting it back together and aligning it to the blade was a snap. This gave me a chance to inspect the trunnions, which are extremely heavy. The wings are easy to install and align, and you wind up with a massive surface of smooth cast iron. I bought the router table attachment, and that makes the…

Mike Davison says:

Very happy with this tablesaw I have been using this tablesaw for more than 6 months now and am quite pleased. Overall quality and accuracy is good. Plenty of power for large hardwood cuts. Accurate, large fence. Heavy/solid tool that does not move when large pieces of wood are cut. Nice saw!I replaced the miter gauge with an Incra MITERV27 and constructed a large outfeed table. Otherwise, the tool as delivered as been perfect for my uses.

Write a comment

*

--- Terms of Use --- Privacy Policy --- Amazon Affiliate --- Affiliate Disclosure --- FTC Statement --- Contact