PORTER-CABLE PBN18200-1 2-Inch, 18 ga. brad nails (1000-Pack)

PORTER-CABLE PBN18200-1 2-Inch, 18 ga. brad nails are designed to be used in 18 gauge fasteners. Brad nails are galvantized coated, with a chisel tip point. 100 fasteners per stick / total 1,000 fasteners in package. Designed for use in: DEWALT®: D51238K, DC608K; Porter Cable: BN200B – and also can be used with BOSTITCH: BT50B, BT200K-2, SB-1842BN, SB-1850BN, SB-2IN1; HITACHI; NT50AE2; PASLODE: T125-F18, T200-F18, IM200F18; SENCO: FP18, FP25XP; and RIDGID: R213BNA PBN18200-1 Features: -Brad nails.-Use with Brad nailer 5/8” to 3/4” BN125A (2750-1014) or 3/4” to 2” BN200A (2750-1022).-18 gauge.-1,000 per box. Dimensions: -2” length.

Product Features

  • Fastener gauge: 18
  • Pack quantity: 1,000
  • Fasteners per stick: 100
  • Master pack quantity: 10
  • Fastener coating: galvanized; fastener point type: chisel

2 thoughts on “PORTER-CABLE PBN18200-1 2-Inch, 18 ga. brad nails (1000-Pack)

  1. These won’t fit all nail guns Unfortunately for consumers, the industry has not standardized on the length of a 2-inch nail. Some are 50 mm (just under 2 inches) and some are 51 mm (just over 2 inches). These Porter-Cable nails are 51mm, actually longer than 2 inches, and will not fit some guns.Some nail guns listed as “up to 2 inches” are made to accept 51 mm nails, others accept up to 50 mm. For example, my WEN 61720 nail gun will NOT accept these Porter Cable 2 inch nails (but it WILL accept 50mm nails, such…

Leave a Reply

Your email address will not be published. Required fields are marked *