LSN3 LOTOS 2-in-1 Air Hardwood Flooring Cleat Nailer and Stapler Gun (Special deal by the end of this week)

January 1, 2014 - Comment

NOTICE: This nailer does NOT come with the “Modeled Grey Carrying Case” The Lotos 2-in-1 Flooring Nailer and Cleat Stapler is an essential flooring tool that is made to be both easy-to-use and durable. Professional flooring installers prefer to use this Nailer and Stapler to meet their flooring needs. The result of engineering excellence, the

Buy Now! $199.00Amazon.com Price
(as of April 20, 2020 12:02 am CDT - Details)

NOTICE: This nailer does NOT come with the “Modeled Grey Carrying Case”


The Lotos 2-in-1 Flooring Nailer and Cleat Stapler is an essential flooring tool that is made to be both easy-to-use and durable. Professional flooring installers prefer to use this Nailer and Stapler to meet their flooring needs. The result of engineering excellence, the 2-in-1 hardwood cleat nailer and stapler shoots both cleat nails and staples without needing to change magazines. This tool shoots both 15.5- and 16-gauge staples ranging from 1 to 2 inches and “L” cleats ranging from 1-1/2″ to 2″; both are held in a magazine capable of holding up to 100 staples or cleats. The standard-sized staples and cleats are easily obtainable from any hardwood store. The body of the gun, constructed from die-cast alloy, is both durable and lightweight, meeting the needs of contractors and industrial companies. Adding stability, an extra-wide composite non-marring base plate is used to protect the flooring from scratching as well as allowing the user to drive fasteners faster and closer to the wall.
This Nailer and Stapler is of the highest quality and guarantees a better flooring experience.

Product Features

  • 2-in-1 Combo of Hardwood Flooring STAPLER & CLEAT NAILER With One Magazine for Both.
  • Staple Size: 15.5 and 16 Gauge 1″-2″ Cleat Size: “L” Shaped 1.5″-2″
  • Lotos carries staples and cleat nails. call 408-739-2329 if you need LOTOS staples or cleat nails
  • Air Inlet: Standard 1/4″ NPT Fastener Capacity: 100
  • Accessories included (check pictures) 3 years warranty on labor and parts

Comments

Chirag says:

does its job nicely I ordered this nailer to install 3/4″ solid red oak. The nailer is working fine. I have already put down 800 2″ L cleat nails ( also from Lotos). Not a single Jam. Nice product. I will recommend this nailer to any DIY installer. I am adding 10 drops of oil provided with the nailer each day before I start my work. I am using the nailer at 100 psi from a 3 gallon compressor. Great product. Does what it suppose to do.

Steve M. says:

Best cleat nailer for the best price, period! Bought the LSN3 for a medium large project in my home.Used it on 700 sq ft of 2-1/4″ x 3/4″ red oak flooring over a double 3/4″ plywood subfloor.I used around 4000 2″ cleats and every one nailed perfectly, with not one jam or misfire.I oiled the gun (about 3 or 4 drops of oil) twice a day during the project and the nailer performed flawlessly.The nylon shoe did a wonderful job of protecting the finish on the flooring (it was a pre-finished floor).One thing I did…

Slider says:

Great Value Excellent tool. It worked flawlessly, better than higher priced nailers I’ve used before.I wish they were still offered with a case.

Write a comment

*

--- Terms of Use --- Privacy Policy --- Amazon Affiliate --- Affiliate Disclosure --- FTC Statement --- Contact